Roland VR-3 Manual do Utilizador descarregar pdf (Página 39)

Performing Output from the USB Port

Making the Connection to a Computer

To make the connection to a computer, carry out the steps described below.

1. Connect a computer.

After starting the VR-3 and the operating system on the computer, use the included USB cable to connect the USB port on the VR-

3 to a USB port on the computer.

* Making the connection via an extension cable or USB hub may result in failure of the computer to detect the VR-3. Connect the VR-3 and

computer directly.

fig.connect-USB.eps

2. Wait for communication between the VR-3 and the computer to be established.

A short while after making the USB connection, communication with the computer starts, and the standard driver for the

operating system is automatically installed. Installing a special driver is not necessary.

* The computer recognizes the VR-3 as a USB video device/audio device.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 55 56

Sem comentários

Roland VR-3 Manual do Utilizador Página 39