Roland CJ-540 Manual do Utilizador Página 43
- Página / 124
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
41
Chapter 2 - Basic Operation
2-3 Loading Media
6
Align the left- and right-hand stoppers with the
width of the media and tighten the screws to
secure in place.
7
Pull out the media so that at least 50 cm (20
in.) hangs down at the front of the machine.
8
Rotate the media flanges on the shaft to take
up the hanging media at the front of the ma-
chine.
To ensure that the media take-up is not crooked,
clear of items such as the media clamps that
may obstruct media feed.
9
With the media pulled out from the roll stretched taut with no slack, move the sheet loading lever
toward "LOAD".
Pinch rollers lower to hold the media in place.
To secure the media in place,
move all the way to "LOAD".
When moved partway, only the
left-hand pinch roller descends.
Data cannot be output while in this
state.
If there is slackness in the loaded media,
the media may move at an angle and come
loose from the pinch rollers.
Screw
Stopper
Media flange
Shafts
Continued on the next page
- USER’S MANUAL 1
- For the USA 2
- For Canada 2
- Contents 3
- Features of the SC-540 6
- To Ensure Safe Use 10
- À propos des symboles 12
- Avis sur les avertissements 12
- 1. Getting Started 17
- 1-1 Checking Accessories 18
- 1-2 Part Names 19
- Inside the Front Cover 20
- Operation Panel 20
- 1-3 Assembling and Installing 21
- Step 1: Assemble the Stand 22
- Chapter 1 - Getting Started 24
- 1-4 Connecting the Cables 28
- Connecting to the Computer 29
- Securing the Cable 30
- Filling Ink 32
- ENV. MATCH 33
- REMOVE THE SHEET 33
- REPLACE KNIFE 34
- FINISHED ? 34
- 2. Basic Operation 37
- Chapter 2 - Basic Operation 38
- Switching On the Power 39
- The POWER LED goes out 40
- 2-3 Loading Media 41
- PINCHROLL ERROR 44
- INVALID LEFT POS 44
- SETUP SHEET 44
- ROLL EDGE PIECE 44
- Adjusting the Head Height 46
- Separating the Media 48
- Removing the Media 48
- 2-4 Printing 49
- W 1234 mm L ----- mm 50
- Top menu 50
- 2-5 Cutting 51
- Test Cutting 52
- 2-6 Printing and Cutting 54
- W 975mm L1209mm 55
- W1000mm L1234mm 55
- CAN'T PRINT CROP 55
- CONTINUE? 55
- Printing with Crop Marks 56
- CANCEL CROPMARK 57
- Aligning Manually 58
- Replacing an Ink Cartridge 61
- 1＿ 2■ 3■ 4 ■ 5■ 6■ 62
- INK REMAINING 63
- Setting the Start Location 64
- To release the setting 65
- 3-4 Setting the Margins 66
- PRINTING ADJ 67
- TEST PRINT 67
- Bidirectional Correction 68
- Saving an Adjustment Value 69
- Environment Matching 70
- NOW PROCESSING 71
- PRINT-CUT ADJ 71
- PRINT - CUT ADJ 72
- PRINT - CUT ADJ 73
- FEED SETTING 73
- Stopping Printing or Cutting 74
- To resume printing 74
- PRESS THE POWER 75
- KEY TO CLEAN 75
- 4. Maintenance 77
- Cleaning the Printing Heads 78
- HEAD CLEANING 79
- FINISHED 80
- CLEANING? 80
- Chapter 4 - Maintenance 81
- 4-3 Replacing the Wiper 83
- 4-4 Other Cleaning Tasks 84
- 4-8 When Moving the Unit 88
- 5. Menus and Keys 91
- 5-1 Display Menus Flowchart 92
- 5-2 Description of Menus 100
- 5-3 Description of Keys 101
- 6. What to Do If 103
- 6-1 What to Do If 104
- (the printing surface) 106
- Chapter 6 What to Do If 107
- The media becomes jammed 108
- Capping the Printing Heads 109
- SET SOL CRT 111
- 123456789101112 111
- 7. Appendix 115
- 7-1 Specifications 116
- Interface Specifications 117
- 7-2 Media Conditions 118
- Acceptable Media Width 119
- Chapter 7 - Appendix 120
- 7-5 About Blade Life 122
- R3-030206 124
Manuais e produtos relacionados com Digitalizar e Imprimir Roland CJ-540
(2 páginas)Philips AJ3500 manuály
Uživatelské manuály a uživatelské příručky pro Budíky Philips AJ3500.
Poskytujeme 1 manuály pdf Philips AJ3500 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comentários a estes Manuais