Roland FJ-40 Manual do Utilizador Página 23
- Página / 99
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
21
2 Basic Operation
2-3 Loading the Material
Load roll material at the proper
position.
Otherwise the roll may
fall, resulting in injury.
When closing the front cover, be
careful not to pinch your fingers.
Doing so may result in injury.
Before loading roll material, be sure to install the media guide.
NOTICE
Acceptable material widths
FJ-600 210 to 1625 mm (8-5/16 to 64 in.)
FJ-500 210 to 1371 mm (8-5/16 to 54 in.)
FJ-400 210 to 1117 mm (8-5/16 to 44 in.)
- When transparent material is loaded, it is necessary to set [SHEET TYPE] to [CLEAR]. For more information, see
"4-7 What to Do If..." ( [SHEET SET ERROR SET AGAIN] appears and the material cannot be detected even
when the [SETUP] key is pressed).
- When loading thicker material or material that is prone to warping, it may be necessary to adjust the head height.
For more information, see "4-2 Adjusting the Height of the Printing Head."
- When changing to a different type of material, it may be necessary to perform feed correction or bidirectional
correction. For more information, see "2-5 Printing -- Making Corrections for Printing."
- When the left or right edges of the material are warped, use the media clamps. Performing printing without using the
media clamps may result in scraping of the heads or jammed material. Scraping of the heads and jammed material
may damage or soil the printing heads, resulting in poorer printing accuracy. Do not use material that is so strongly
warped that the media clamps are lifted.
- FJ-500 1
- For the USA 2
- For Canada 2
- Table of Contents 3
- To Ensure Safe Use 4
- Ink cartridge 6
- Avis sur les avertissements 7
- À propos des symboles 7
- Utiliser l'alimentation 10
- 1 Introduction 11
- Front View 12
- Rear View 12
- Side View 13
- Inside the Front Cover 13
- Operation Panel 14
- 1-2 Making the Connections 15
- Connecting the Cable 16
- For a network connection 17
- 2 Basic Operation 18
- Ink cartridge ports 19
- Turn Over the Plate 20
- Install the Ink Cartridges 21
- 2-2 Powerup 22
- 2-3 Loading the Material 23
- Loading Roll Material 24
- W 1234 mm 25
- NORMAL BI-DIR 25
- Loading Sheet Material 26
- Installing the Media Clamps 27
- CLEANING 28
- TEST PRINT 28
- 2-5 Printing 29
- Pausing Printing Operations 30
- Stopping Printing Operations 30
- About the [EMPTY MODE] 31
- Setting the Printing Mode 32
- PRINT QUALITY 33
- BI-DIRECTION 33
- 2 Basic Operation 34
- PRINT AREA 36
- LEFT EDGE 36
- Feed Correction 38
- Bidirectional Correction 39
- Remove the Material 40
- 2-7 When Not in Use 42
- Switch to "O" 43
- 3 Maintenance 44
- Roland FJ-500 45
- Ver.1.00 45
- PIGMENT 8COLOR 45
- INK REMAINING 46
- O G c m 46
- K C M Y 46
- HEAD CLEANING 47
- Checking the Included Items 48
- * Do not touch these areas 49
- Performing Cleaning 50
- Continued on the next page 51
- Left-hand head 52
- 3 Maintenance 54
- Sponges (for cleaning hooks) 56
- BOTH HEADS 58
- INK CONTROL 59
- EMPTY MODE 59
- DRAIN TANK 60
- The POWER LED goes out 61
- Bottom plug 61
- Drain bottle 61
- Positioning groove 63
- 3-7 Cleaning 64
- SET CLEANING 66
- LIQUID[OGcmKCMY] 66
- REMOVE CLEANING 66
- 4 User's Reference 67
- HEAD HEIGHT 68
- HIGH LOW 68
- 4-3 Printing Area 69
- 4-4 Display Menus Flowchart 70
- To the [INK CONTROL] menu 72
- 4 User's Reference 73
- Description of Keys 74
- Description of Menus 76
- 4-6 Network Connection 79
- For Windows 80
- For Macintosh 80
- Settings for Windows 98/95 81
- Settings for Windows NT 4.0 81
- Settings for Macintosh 81
- For Windows 98/95 84
- For Windows NT 4.0 85
- 4-7 What to Do If 86
- O___G _c _m _ 89
- K __C M Y __ 89
- The material becomes jammed 91
- Printed lines are misaligned 92
- SET CARTRIDGE 94
- [OGcmKCMY] 94
- Messages 95
- 4-8 Specifications 96
- Interface Specifications 97
- Control Area 98
- RJ-45 (Ethernet) connector 98
- Roland License Agreement 99
Manuais e produtos relacionados com Digitalizar e Imprimir Roland FJ-40
Digitalizar e Imprimir Roland CJ-540 Especificações
(32 páginas)
(32 páginas)
(92 páginas)
Digitalizar e Imprimir Roland FJ-40 Especificações
(28 páginas)
(28 páginas)
Digitalizar e Imprimir Roland RA-640 Especificações
(50 páginas)
(50 páginas)
(52 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.050 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais