Roland VS-540 Guia de Configuração descarregar pdf (Página 40)

5. Installing the Ink Cartridges



When the screen shown in the left is displayed, turn the

hexagonal wrench to the direction of the arrow shown in the

gure below.

The valve opens.

When the screen shown in the left is displayed, the cleaning operation is

still continued inside the machine. Open the valve immediately. Never leave

the machine with the valve closed. It may damage the print heads.

Wait for the next instruction.

When the screen shown in the left is displayed, repeat Procedure



and



If you don’t open it within a specied time, operate according to the instruction on the

screen.

Make sure the drain bottle is not overowing with discharged

uid, and then press

When this screen appears, the ink-lling process is nished.

If you do not follow the correct procedures, the message below will be displayed on

the screen.

When this screen appears, make sure the drain bottle is not overowing with discharged uid, and

then press

to proceed with your work following the on-screen instructions.

Hexagonal

Wrench

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 55 56

Sem comentários

Roland VS-540 Guia de Configuração Página 40