Roland PC-300 Manual do Utilizador

Color CAMM PRO PC-60APPLICATION SOFTWARE GUIDECONTENTSSetting & Functions of Windows DriverHow to Print from Adobe Illurstrator 7.01 (Basic Operat

Color % R G B Cyan 100% 0 255 255 Cyan 50% 128 255 255 Cyan 25% 192 255 255 Magenta 100% 255 0 255 Magenta 50% 255 128 255 Magenta 25% 255 192 255 Yel

How to Print from CorelDRAW 7 (Basic Operation)Left data will be usedfor explanation.Start CorelDRAW 7 and enter File --> Print Setup.Enter the [S

Enter the [Output Option] Tab.Make sure [Cutting] is selected when data includesthe cutting data.When completing the above settings, click the OK butt

Software Resolution Length ( Max )CorelDRAW7 600dpi 1263.5mm300dpi 2650mm150dpi 3276.7mmMake sure that the settings of the[Outline Tool] is done corre

How to Print Tile Page from Illustrator 7.01 (Advanced Operation)This section explains how to print tile page from Illustrator 7.01.Please read the s

Make sure that the image is inside the page displayed.Open the [Document Setup] and remove the check from the [Use Print Setup] and then open the[Prop

<Notes for Printing Tile Page>1. Because the Illustrator 7.01 is a software made by American Company, Adobe System Corporation,the concept of th

How to Print Tile Page from CorelDRAW 7 (Advanced Operation)This section explains how to print tile page from Illustrator CorelDRAW 7.Please read the

Click OK button after completing the above settings.Click [Preview] from the Print Dialog.After checking the image, click [Option].Select [Print tiled

This guide explains the operation based on the fact that the Roland Windows Driver for Windows95/98 isused.Please be noted that the Windows Driver bel

Sheet Size Width x Length (mm) Printing Area (mm) A4 210 x 297 173.3 x 176.1 A3 297 x 420 260.0 x 298.0 ANSI A 215.9 x 279.4 178.8 x 157.1 AN

Make sure to set the [Weight] in Illustrator 8.0 to 0.1pt (0.04mm) for the lines to be cut.Make sure to select [by Color] for [Cutting] in the [Output

What to do if . . . .Windows Driver• Time Out Error is displayed.This error is displayed sometimes when printing image file with a big size.Open the p

• PC-60 cuts but doesn’t print.When [Printing] is not selected, PC-60 doesn’t print. Make sure to select [Printing].• Image is printed with Special C

345Roland ColorCAMM PC-60 Properties (Size)12Cutting line can be selected and cutting speed can be set.Bitmap data will be printed instead of being cu

12How to select cutting• By ColorOnly the vector data pointed out by specific color can be cut.Similar colors won’t be cut. Only colors matched with

Sheet Size Feeding Rate A4 174mm A3 297mm ANSI A 156.4mm ANSI B 308.8mm 12inch x 33inch 715.2mm 16inch x 33inch 715.2mm 24inch x 33inch 715.2

2ProcessPC-60 prints in full color using the process color. Do not select any of them when printing in Special Color.• Y.M.C.KPC-60 will print in ord

Roland ColorCAMM PC-60 Properties (Image Correction)11Correction Value• BrightnessBrightness of the image can be adjusted. Image will be brighter whe

Left data will be used for explanation.How to Print from Adobe Illustrator 7.01 (Basic Operation)Start Illustrator7.01 and enter File --> Document

Select the [Output Option] Tab.Make sure [Cutting] is selected when dataincludes the cutting data.When completing the above settings, click the OK but