Roland AE-7000 Manual do Proprietário descarregar pdf

VM-C7200/C7100 Newly Added Functions

Table of Contents

Newly Added Functions (Ver.1.1).................................1

How to connect the ADA-7000

and the AE-7000 series..................................................1

If the system software of the VMC7200/C7100 is

Ver.1.10 or later.................................................................................2

How to connect the AE-7000

and the VM-7000 series.................................................3

If the system software of the VM-C7200/C7100 is

Ver.1.10 or later.................................................................................4

How to connect the VSR-880

and the VM-7000 series.................................................4

MTR control functions.....................................................................5

Newly Added Functions (Ver.1.5).................................6

Dynamics Processing on Every Input Channel.........6

Selecting the dynamics processor...................................................6

Editing Dynamics Processor...........................................................7

Using Libraries..................................................................................8

Scene...................................................................................................8

Automix .............................................................................................8

Others..............................................................................9

Effects Bypass Switch.......................................................................9

INPLACE SOLO ...............................................................................9

SOLO SW Flashing...........................................................................9

Monitor Source Select.......................................................................9

Libraries Newly Added..............................................10

PROJECTs, SCENEs and TEMPLATEs

created on the VM-7000 Ver.1.1 or 1.5........................10

MEMO..............................................................................11

Newly Added Functions (Ver.1.1)

Following functions have been added to the system for the

VM-C7200/C7100 (V-Mixing Console; Ver.1.1 or later).

When you turn on the power of the VM-C7200/7100, current

system version number of your VM-C7200/C7100 will be

appeared in the display.

How to connect the ADA-7000

and the AE-7000 series

To connect the VM-7200/7100 and the ADA-7000 via R-BUS,

VM-24E I/O Expansion Board (sold separately) is needed.

By installing the VM-24E to the VM-7200/7100 processor,

you can connect up to three ADA-7000’s.

* Refer to VM-7200/7100 Owner’s Manual p. 14 “Installing R-

BUS (RMDB2) Connectors (VM-24E).”

Connection

Connect the VM-7200/7100 and the ADA-7000 with the R-

BUS cable attached in the ADA-7000 box.

* Refer to ADA-7000 Owner’s Manual p. 9 “An Example of

Connection.”

Booting up

Turn the power on the ADA-7000 first, then the VM-7200/

7100 processor, and finally the VM-C7200/C7100 console.

Clock source setting

If clock source has not been set, noise may be generated from

the audio output on the ADA-7000 and the VM-7000. While

setting the clock source, please turn down the master and

monitor level, and turn up again after the setting is finished.

Set the sampling clock on the ADA-7000 and the VM-7000 as

follows.

Clock Source on the ADA-7000

connected to the R-BUS (1–8):...................................R-BUS

Clock Source on the ADA-7000

connected to the R-BUS (9–16):.................................R-BUS

Clock Source on the ADA-7000

connected to the R-BUS (17–24):...............................R-BUS

Master clock on the VM-7000: ................................INTERNAL

1 2 3 4 5 6 ... 11 12

Resumo do Conteúdo

Página 1 - How to connect the ADA-7000

1VM-C7200/C7100 Newly Added FunctionsTable of ContentsNewly Added Functions (Ver.1.1)...1How to connect the ADA-7000and

Página 2 - If the system software of the

10VM-C7200/C7100 Newly Added FunctionsLibraries Newly AddedFollowing channel dynamics libraries have been added to the system for the VM-C7200/C7100 (

Página 3 - Clock source setting

11VM-C7200/C7100 Newly Added FunctionsMEMO

Página 4

Página 5 - MTR control functions

2VM-C7200/C7100 Newly Added FunctionsADA-7000 settingCheck if the clock source on the ADA-7000 is set to R-BUS. When the ADA-7000 is booted up, the cl

Página 6 - Dynamics Processing on Every

3VM-C7200/C7100 Newly Added Functions3. Control the gain and phantom power on/off in the same manner as for the [INPUT].* PAD on the ADA-7000 is autom

Página 7 - Editing Dynamics Processor

4VM-C7200/C7100 Newly Added FunctionsExample 3• If AES/EBU device does not output the word clockConnect the output of the AES/EBU device to the INPUT

Página 8 - Using Libraries

5VM-C7200/C7100 Newly Added FunctionsVSR-880 SettingsSet the some parameters of the VSR-880 as follows.MASTER Direct Out: OnINPUT MIXER IN1 Input: R-B

Página 9

6VM-C7200/C7100 Newly Added Functions* Latest song list can be displayed by pressing [F6] (SCAN).Song StoreYou can store the current song to the VSR-8

Página 10 - Ver.1.1 or 1.5

7VM-C7200/C7100 Newly Added Functionsfig.03_704. Highlight the desired algorithm with V1 knob (SELECT).5. Press [F1] (SET) to make the algorithm effec

Página 11

8VM-C7200/C7100 Newly Added FunctionsExpanderExpanding the dynamic range with a certain ratio.fig.05_70[ON] On/Off switch of the expanderThresh Thresh

Página 12

9VM-C7200/C7100 Newly Added Functions3. Press [AUTO-MIX] under CH STATUS.4. Press the status buttons for the channel for which auto-mixing is to be re