Roland VS-2000 Guia do Utilizador descarregar pdf (Página 45)

Chapter 3 Playback Operations

Chapter 3

Using Locators

One of the fastest ways to move around in your song is to use

the locators. Time locators are stored for each song using the

LOCATOR buttons ([1]-[8]). The VS-1680 provides 64

different locators per song. The locators are organized into

eight banks, with eight locators per bank. Each button stores

a single time location in the song, and you can move

instantly to the stored time by pressing the button. The

locators also provide a useful and convenient way to define

sections of a song for Loop Recording, to store points for

Punch-In recording, and to store track editing values.

fig.02-06c

Storing and Recalling Locators

1. Storing Locators

a. Move to the position in the song where you want to

store a locator.

b. Press any of the eight LOCATOR buttons ([1]-[8]) that

are unlit. When a LOCATOR button is lit, it indicates

that a locate point is already stored there. For

example, to set Locator 1, press [1].

* You can store locators while recording, during playback, or

when the song is stopped. When a locate point is stored, the

corresponding indicator lights.

2. Recalling a Stored Locator

Press the LOCATOR button for the locator you wish to

find. For example, if you wish to move the play position

to Locator 3, press [3]. You can do this while the song is

playing, or when stopped.

3. Clearing a Locator

Press and hold [CLEAR], and press the locator buttons

([1]-[8]) that you wish to clear.

Changing the Locator Bank

1. Press [BANK].

2. The LOCATE buttons now act as buttons to change

locator banks. A blinking locator button will now

indicate which bank is active. The currently active bank

will be blinking.

3. Press the LOCATOR button ([1]-[8]) corresponding to

the bank number you wish to select. For example, if you

wish to use Locator Bank 4, press [4].

4. Once you’ve selected a locator bank, the [Bank] indicator

goes out. To return to the previously selected bank, press

[Bank] once more, followed by the locator button

corresponding to the bank you want. For example, if

Bank 4 is current, and you wish to get back to Bank 1,

press [Bank], and then press [1].

Editing Stored Locators

If you store a locator and later decide to change its value, a

simple method is to clear it, move to the new position, and

re-store the locator at the new position. Here is another way

to change the locator values.

1. Hold [SHIFT] and press [F6 (UTILITY)]. The Utility

menu icon appears in the display. If it is not displayed,

press [F6 (EXIT)].

2. Press [F2 (Loc)]. If “Loc” does not appear above [F2],

press [PAGE] until “Loc” is displayed, and then press [F2

(Loc)].

3. Each of the locators is displayed. Use [ ], [ ],

[ ], and [ ] to move the cursor to the locator you

want to change. If no value is stored for a locator, “-h-m-

s-f- —-” appears in the display.

fig.02-06d

4. Move the cursors to the locator you wish to change. Use

the TIME / VALUE dial to modify the value of the

locator.

87654321

00h00m00s00 Time

Bank 2

Bank 1

Bank 8

Auxiliary Cursor Cursor

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 281 282

Comentários a estes Manuais

Sem comentários

Roland VS-2000 Guia do Utilizador Página 45

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos Musicais Roland VS-2000