Roland Metaza MPX-80 Manual do Utilizador descarregar pdf (Página 38)

Chapter 3 Performing Printing

3-6 Creating Printing Data (Printing on Flat Material)

This section describes how to create data, using printing of a plate like the one shown below as an example.

☞ P. 28, "Preparing Material to Print"

Information on how to create data for printing on cylindrical material and

other curved surfaces is here: ☞ P. 58, "Creating Data for Printing on a

Curved Surface"

Step 1 : Decide on the Material

To start with, you decide on the material to print. METAZAStudio has a number of different types of material preregis-

tered. Here, let’s try using the material with the “tag” name, which has the same shape as the plate used in the example

(a width of 25 millimeters and a height of 40 millimeters).

If you want to register new material, see here: ☞ P. 62, "How to Register New Material "

Procedure

➊

Click .

The [Material] window appears.

➋

Click the icon with the “tag” name,

then click

The [Material Size] dialog box appears.

Enter the values for the width and

height of the material (in this ex-

ample, 25 millimeters for the width

and 40 millimeters for the height),

then click [OK].

The material you selected appears in the

Edit window. The portion displayed as the

material becomes the printing area with-

out change.

Edit window

40mm

25mm

* There is a margin in the

outside edge of the plate.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 95 96

Sem comentários

Roland Metaza MPX-80 Manual do Utilizador Página 38