To Ensure Safe Use8 This machine weighs 160 kg (353 lb.). Media weighs 30 kg (66 lb.). Danger of re, burns, or toxic gas emissions WARNINGInstall t

To Ensure Safe Use9 Warning LabelsWarning labels are afxed to make areas of danger immediately clear. The meanings of these labels are as follows. B

10 Pour utiliser en toute sécuritéLa manipulation ou l'utilisation inadéquates de cet appareil peuvent causer des blessures ou des dom-mages ma

Pour utiliser en toute sécurité11 L'utilisation incorrecte peut causer des blessures ATTENTIONS'assurer de suivre les procédures d&apos

Pour utiliser en toute sécurité12 ATTENTIONBrancher à une prise électrique conforme aux caractéristiques de cet appareil (ten-sion, fréquence et cour

Pour utiliser en toute sécurité13 Remarques importantes à propos du câble d'alimentation, de la che et de la prise électriqueNe jamais dépo

Pour utiliser en toute sécurité14 L'encre, les liquides nettoyants et les liquides usées sont inammables et toxiques En cas d'ingestion ou

Pour utiliser en toute sécurité15 Le poids de cet appareil est de 160 kg (353 lb.)Le poids du support est de 30 kg (66 lb.) Risque d'incendie, d

Pour utiliser en toute sécurité16 Vignettes d'avertissementDes vignettes d'avertissement sont apposées pour qu'il soit facile de repér

17Setup Guide

181. Included ItemsThe following items are packed together with the unit. Make sure they are all present and accounted for.Power cord Arm (right) Arm

192. Installation EnvironmentDeciding On an Installation SiteInstall in a quiet, stable location oering good operating conditions. An unsuitable loca

2. Installation Environment20Temperature and HumidityMaintain the specied temperature and humidity even when the machine is not in use. Temperatures

213. Assembling and InstallingAssembling the StandFirst assemble the stand, then mount the machine on top of the stand.CAUTIONUnpacking and installat

3. Assembling and Installing22Place the machine on the stand and secure it in place.Tighten the bolts securely. Loose bolts may cause the stand to wo

3. Assembling and Installing23Install the two shafts to the arms.Install the stopper-attached shaft at the location closest to the back of the machin

3. Assembling and Installing24Installing the Drain BottleProcedureRemove the bottom plug.Use caution, because discharged uid used in inspection may

3. Assembling and Installing25ProcedureRemove the packing.Store the packing materials carefully, because they are needed again when transporting the

3. Assembling and Installing26Removing the Packing MaterialsTape and packing materials are attached to the machine to protect it from vibration during

274. Connect the CablesConnecting the CablesWARNINGConnect to electrical outlet that complies with this machine's ratings (for voltage, frequenc

1Thank you very much for purchasing this product. To ensure correct and safe usage with a full understanding of this product's performance, plea

285. Installing the Ink CartridgesFilling with Ink for the First TimeSpecial procedures are required when installing ink cartridges for the rst time.

5. Installing the Ink Cartridges291.Switch on the power and make the initial settings.Close the front cover.Switch on the main power switch.Hold do

5. Installing the Ink Cartridges302.Clean the heads using the SOL INK cleaning cartridges. Make sure the ink type matches the ink cartridges.Press .

5. Installing the Ink Cartridges31Pull out the dummy cartridges from slots 3 and 4.Press .Insert the SOL INK cleaning cartridge into slots 3 and 4.I

5. Installing the Ink Cartridges32Pull out the dummy cartridges from slots 1 and 2.Press .When this screen appears, cleaning is nished.Make sure the

336. Installing the BladeCAUTIONBe sure to perform operations as specied by these instructions, and never touch any area not specied in the instruc

6. Installing the Blade343.Install the blade holder.Loosen the screw shown in the gure.Support the screw from below and insert the blade holder.Ti

357. Network SettingsIntroductionThis machine has a built-in print server as a network interface. When you use the print server, you can send output d

7. Network Settings36Click [Properties].If you're using Windows Vista and the [User Account Control] dialog box appears, click [Allow].The [Loca

7. Network Settings37Step 2: Make the Network Settings on the PrinterImportantThe addresses used in this section are merely example settings. For deta

1 2Contentshttp://www.rolanddg.com/Copyright © 2009 Roland DG CorporationThis document is the setup guide for both the SP-540i and the SP-300i. This

7. Network Settings38Press .Repeat  and  to set the subnet mask.When you've nished making the setting, press .If you’re using one computer

398. When Not in Use for a Prolonged PeriodKeep Performing MaintenanceSwitch On the Power Once a MonthSwitch on the sub power once a month. When you t

409. When Moving the UnitProcedures from Preparing to Move Through ReinstallingTo move the machine, you must completely drain all ink inside the machi

9. When Moving the Unit412. Secure the print heads in place.Remove the drain bottle and discard the discharged ink.Attach the bottom plug where the

9. When Moving the Unit42Secure the print heads in place using the retainer.For information on how to secure in place, go to "3. Assembling and

43

44

R1-090619

3 To Ensure Safe UseImproper handling or operation of this machine may result in injury or damage to property. Points which must be observed to preven

To Ensure Safe Use4 Incorrect operation may cause injury.WARNINGBe sure to follow the operation procedures described in this documentation. Never

To Ensure Safe Use5 Danger of electrical short, shock, electrocution, or reRatings WARNINGConnect to an electrical outlet that com-plies with this m

To Ensure Safe Use6 Important notes about the power cord, plug, and electrical outletNever place any object on top or subject to damage.Never ben

To Ensure Safe Use7 Ink, cleaning uid, and discharged uid are ammable and toxic. In the event of ingestion or physical distress In the event of c