Roland VS-640i Guia de Configuração descarregar pdf (Página 48)

9. When Moving the Unit

Procedures from Preparing to Move Through Reinstalling

To transfer this machine, you need to secure the print heads in place with the retainers to protect them from

damage. If your ink type is the W mode or WMT mode, you also need to circulate the ink manually then. If you

transfer the machine without performing such steps, it may cause ink leakage, which can damage the internal

devices of the machine, or cause damage to the head.

Important Notes on Moving

 Once the arrangement to transfer the machine is complete, move the machine promptly,

and turn on the power immediately after the machine is relocated. If you leave the machine

without turning on the power, the deposited ink is coagulated, and it may result in problems

such as clogging of the print heads.

 When moving the machine, keep it at a temperature between 5 to 40°C (41 to 104°F) and at

relative humidity between 20 to 80% (with no condensation). Failure to do so may result in

breakdown.

 Handle the machine with care when moving, keeping it level (not tilted at an angle) and pre-

venting it from striking other objects.

Circulate the ink manually. (In the case of W mode, MT mode, and WMT mode)

If you use the CMYK mode or CMYKLcLm mode, start from the step



Press .



Press several times to display the left gure.

Press

Press several times to display the left gure.

Press

in this order.

Press .

Circulation starts.

When this screen appears, circulation is nished.

Discard the discharged ink.



press .



Press several times to display the left gure.

Press

, and then press twice.

Press , and then .

I/S MENU

CIRCULATE INK

CIRCULATING INK

I/S MENU

CIRCULATE INK

SUB MENU

MAINTENANCE

1 2 ... 43 44 45 46 47 48 49 50 51 52

Comentários a estes Manuais

Sem comentários

Roland VS-640i Guia de Configuração Página 48

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Roland VS-640i