Roland MIDI Implementation DP990F Manual do Utilizador

1MIDI Implementation Model： Date： Version： DP990F, HP302, HP305, HP307, HPi-6F, HPi-7F, LX-10F, RG-1F, RG-3F Sep.1,2010 1.00 Copyright © 2010 ROLAN

103. Parameter Address Map (Model ID = 42H) This map indicates address, size, Data (range), Parameter, Description, and Default Value of parameters w

11 02: Room 3 03: Hall 1 04: Hall 2 05: Plate 06: Delay 07: Panning Delay 40 01 31 00 00 01 00-07 REVERB CHARAC

12●Part Parameters This instrument has 16 parts. Parameters that can be set individually for each Part are called Part parameters. If you use exclusi

13* “Rx.BANK SELECT” is set to OFF by “GM1 System On,” and Bank Select message will be ignored. * “Rx.BANK SELECT” is set to ON by “GM2 System On.”

1440 2x 28 00 00 01 00-7F CAf LFO2 PITCH DEPTH 0-600 [cent] 00 0 [cent] 40 2x 29 00 00 01 00-7F CAf LFO2 TVF DEPTH 0-2400 [cent] 00

154. Supplementary material ●Decimal and Hexadecimal table In MIDI documentation, data values and addresses/sizes of exclusive messages etc. are expr

16●Example of an Exclusive message and calculating a Checksum Roland Exclusive messages are transmitted with a checksum at the end (before F7) to mak

175. Effect List 0100: Equalizer 0101: Spectrum 0102: Enhancer 0104: Isolator 0105: Low Boost 0106: High Pass Filter 0110: Overdrive 0111: Distortion

18● 0104: Isolator This is an equalizer which cuts the volume greatly, allowing you to add a special effect to the sound by cutting the volume in va

19● 0107: Speaker Simulator Simulates the speaker type and mic settings used to record the speaker sound. No Parameter Value Description 1

2○Expression (Controller number 11) Status 2nd byte 3rd byte BnH 0BH vvH n = MIDI channel number: 0H-FH (ch.1-ch.16) vv = Expression: 00H-7FH (0

20● 0120: Phaser This is a stereo phaser. A phase-shifted sound is added to the original sound and modulated. No Parameter Value Description 1

21● 0127: 3D Flanger This applies a 3D effect to the flanger sound. The flanger sound will be positioned 90 degrees left and 90 degrees right. No P

22● 0103: Humanizer Adds a vowel character to the sound, making it similar to a human voice. No Parameter Value Description 1 Drive Sw 0-1

23● 0130: Compressor Flattens out high levels and boosts low levels, smoothing out fluctuations in volume. No Parameter Value Description 1 At

24● 0143: Space D This is a multiple chorus that applies two-phase modulation in stereo. It gives no impression of modulation, but produces a transp

25● 012d: Rotary2 This type provides modified response for the rotary speaker, with the low end boosted further. This effect is a descendant of the R

26● 015c: Stereo Delay2 This is a stereo delay. No Parameter Value Description 1 Delay Left Mode 0-1 ms, note When this is set to “note,”

27● 015f: Stereo Delay5 This is a stereo delay. No Parameter Value Description 1 Delay Left Mode 0-1 ms, note When this is set to “note,” t

28● 0157: 3D Delay This applies a 3D effect to the delay sound. The delay sound will be positioned 90 degrees left and 90 degrees right. No Parame

29● 0175: Telephone No Parameter Value Description 1 Voice Quality #1 0-15 0-15 Audio quality of the telephone voice 2 Treble 0-30 -15 -

3 ○Portamento control (Controller number 84) Status 2nd byte 3rd byte BnH 54H kkH n = MIDI channel number: 0H-FH (ch.1-ch.16) kk = source note

30● 0206: Enhancer→Chorus This effect connects an enhancer and a chorus in series. No Parameter Value Description 1 Enhancer Sens 0-127 0-1

31● 020a: Flanger→Delay This effect connects a flanger and a delay in series. No Parameter Value Description 1 Flanger Pre Delay 0-125 0.0-

32MIDI Implementation Chart DIGITAL PIANO Date: Sep. 1, 2010 Model DP990F, HP302, HP305, HP307, HPi-6F, HPi-7F, LX-10F, RG-1F, R

4to specify the parameter to be controlled, and then use Data Entry messages to specify the value of the specified parameter. Once an RPN parameter h

5BnH 7DH 00H n = MIDI channel number: 0H-FH (ch.1-ch.16) * OMNI ON is only recognized as “All notes off”; the Mode doesn’t change (OMNI OFF remai

6 Byte Explanation F0H Exclusive status 41H ID number (Roland) 10H Device ID (dev: 00H-1FH (1-32), Initial value is 10H (17)) 42H Mod

7Status Data byte Status F0H 7FH, 7FH, 09H, 01H, 0nH, ppH, rrH F7H Byte Explanation F0H Exclusive status 7FH ID number (Universal Re

8aaH Address MSB: upper byte of the starting address of the transmitted data bbH Address: middle byte of the starting address of the tran

9 System exclusive messages ○Identity Reply Status Data byte Status F0H 7EH, 10H, 06H, 02H, 41H, vvH,,vvH, nnH, nnH, rrH, rrH, rrH, rrH