Roland SJ-740 Manual do Utilizador descarregar pdf (Página 29)

Head Height Adjustment

5. Check the gap between the Head and the Plate (Fig. 7). If it is uneven, carryout the

Head Height Adjustment procedure once again. If the adjustment is fine, tighten the

Carriage screws, change the Head Height back to the highest position using the Head

Height Lever and manually move the Carriage back to the home position and close the

Cap following the display menu (Fig. 8). Then, remove the Adjustment Plate.

Fig. 7

Fig. 8

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 52 53

Sem comentários

Roland SJ-740 Manual do Utilizador Página 29