Roland ATELIER Combo AT-350C Manual do Utilizador descarregar pdf (Página 72)

Recalling the Order that the Registrations are Saved (Load Next)

You can recall Registrations in the order in which they were saved on the USB memory or User memory. This function is called “Load Next.”

When you will be performing live, you can save Registration sets to USB memory in the order in which you will be performing. Then while you perform,

you can recall the next Registration set easily and smoothly.

Changing the assignment of the [Manual] button

Here’s how you can assign the Load Next function to the [Manual] button.

1. Press the [Utility] button.

2. Press the Menu [

] [ ] buttons to select “ManualButtonAssign.”

3. Use the Value [-] [+] buttons to select “LOAD NEXT.”

4. Press the [Display/Exit] button.

To return to the basic screen.

Using the load next function to recall registrations

You can recall registrations in the order in which they are saved on a USB memory or in user memory.

1. If you want to load a Registration from USB memory, connect your USB memory to the USB Memory connector.

2. Press the [Manual] button.

The rst Registration saved on the USB memory will be recalled into the ATELIER.

To cancel the procedure, press the [Reset] button.

3. Press the [Rec] button.

The Registration will be conrmed.

4. Press one of the Registration [1]–[8] buttons.

The Registration will be loaded (recalled into internal memory).

5. Repeat steps 2 and 4 to successively recall the Registration sets.

MEMO

You can assign the Load Next functions to either of the foot switches located on each side of the Expression Pedal (p. 93).

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 131 132

Sem comentários

Roland ATELIER Combo AT-350C Manual do Utilizador Página 72